HYDRAULIC CONTROLS
We offer easy-to-apply, environmentally ruggedized electronic controllers.
Our controllers have the capability to be user adjustable locally or pre-programmed to suit virtually any application requiring an electro-hydraulic solution and are universally compatible with all major hydraulic OEM proportional products.
UCONTROL™ MC4‑26‑20
Rugged machine controller with 26 inputs and 20 software selectable outputs
The UControl MC4-26-20 mobile machine controller brings powerful hydraulic control and extensive flexible I/O to rugged applications.
With the most I/O of any controller in the UControl series, the MC4-26-20 is ready for high-performance fluid power control and 26 total inputs and 20 total outputs. Built to perform in high heat and high vibration areas, CUontrol mobile controllers deliver extreme durability with precision control.
Featuring multiple CAN interfaces, open/short circuit protection, flexible universal inputs and software selectable outputs, UControl mobile controllers are ready and scalable for a variety of equipment needs and applications.
UControl mobile controllers are programmable with ACE, an intuitive new development environment from Enovation Controls, or CODESYS
I/O Summary
- Inputs (26):
- Universal Analog / High Frequency: 10
- Universal Analog: 16
- Outputs (20) [Software Selectable]:
- 4A PWM (feedback): 10
- Dual Range PWM 4A / 0.5 A (feedback): 10
Hardware
- CAN 2.0B / J1939: 3 Channels
- Sensor Supply: (2) 400mA max @ 5 or 10 VDC [Software Selectable Voltage]
- Connectors:
- J1A (4 pin) – DTP06-4S
- J1B (6 pin) – DT06-6S-E008
- J2 (18 pin – A key) – DT16-18SA-K004
- J3 (18 pin – B key) – DT16-18SB-K004
- J4 (18 pin – C key) – DT16-18SC-K004
- LED Indicators:
- (1) Green – Power Status
- (1) White – Software Configurable
- (1) Blue – Software Configurable
Power Supply
- Nominal Supply Voltage: 6-32 VDC, Nominal Operation @ 12 /24 VDC
- Peak Voltage During Load Dump: Power supply suppression limits voltage to 55 Volts for duration of Load Dump Event (2 ohm supply)
- Maximum Current: 50 A (25 A with only 1 Power / 1 GND connected)
- Idle Current 12/24 VDC:
- < 200mA @ 12VDC
- < 100mA @ 24VDC
- Standby Current 12/24 VDC:
- < 5mA @12VDC
- < 2.5mA @ 24VDC
- Node/Sleep Pin: Control sleep and wake settings
Physical & Environmental
- Operating Temperature Range: -40 °C to +105 °C (May be limited to +85°C at full rated current)
- Storage Temperature Range: -40 °C to +125 °C
- Operating Altitude: 0-4000 m
- IP Rating: IP67 (IP69K with harness-side rated boots)
- Vibration: 5.82 Grms, 8 hours per axis
- Shock: ±50G, 6ms
- Housing: Cast aluminum housing, soft-gel potted for extreme ruggedness and durability
- EMC: 2014/30/EU (CE / E-MARK), CISPR 11, CISPR 25, EN 60945, EN 61000-4-2, EN 61326-1, SAE J1113-2, SAE J1113-4, SAE J1113-11, SAE J1113-12, SAE J1113-13, SAE J1113-21, SAE J1113-22, SAE J1113-26, SAE J1455
- Dimensions: 250 mm x 140 mm x 60 mm (refer to Figure 2.1)
- Weight: Less than 5 pounds
