io configurable can input-output module

The Murphy Intelligent Xpansion Power Distribution Module (PDM) expands CAN bus control networks by replacing existing relay and fuse boxes with more reliable solid-state switches that can directly drive work lights, wiper motors, cooling fans, directional DC motors and other high current loads.

Featuring digital switching and up to 15-amp outputs, the module is housed in a compact, sealed enclosure that can be mounted remotely on the equipment to greatly reduce wiring costs.

For applications not requiring a CAN-Bus control, the inputs can directly trigger outputs without the need for a dedicated controller.

Operating Voltage	8-32V (IX3212-24) for 2G7:G374V Systems
Total Current	70 A maximum continuous
Dimensions	245 mm (L) x 140 mm (W) x 50 mm (H)
Mass	0.9 kg (2.0 lb)
Operating Temperature	-40°F to 185°F (-40°C to 85°C)
Storage Temperature	-40°F to 275°F (-40°C to 135°C)
Electrical and EMI/EMC	2004/108/EC and 2006/95/EC directives
	IEC 61000-4-3, -4-6 and -4-8
	EN 60945 / CISPR 11
	EN 61326-1

Shock	30G, 3 cycles
Vibration	5-25g, 50-2,000Hz, 72 hrs per axis
Sealing	IP66 and 67
	SAE J1455 4.5.3 (10,300 kPa @ 50°C and 100 mm away for 15 min)

12 Outputs	(6) 15 A max per channel, 500 Hz
	(6) 15 A max, 1 kHz
	Channel overload set in 2.5 A increments
	High-side, open-loop PWM and directional DC motor control (H-bridge) modes
	Off-state leakage current <0.1 mA

20 Inputs	12 digital, tri-state, input impedance 7.7 kΩ
	6 analog, 0-5 V, input impedance 100 kΩ pull-down
	2 analog, resistive, input impedance 2.2 kΩ pull-up
	10 bit resolution on all analog inputs

Sensor Supply	5V @ 70 mA
Communications	1 CAN 2.0B, 250 kbps, J1939 proprietary messaging
Mating Connectors	Deutsch DTHD, DT, and DTP Series
	J1, J2 – DTHD06-1-4S
	J3 – DT06-12SA (Gray)
	J4 – DT06-12SB (Black)
	J5 – DT06-12SC (Green)
	J6 – DTP06-2S

Certifications	CE mark

Product Original Page