capacitive electrolyte level sensors

The ABERTAX® CLS - STANDARD is our basic version for monitoring the electrolyte level in a battery. The level probe is integrated in the LED housing, giving a steady GREEN signal, when electrolyte level is above the cell plates, and turning to flashing RED, when the electrolyte level is below the cell plates.

Please follow the attached installation instruction.

To install the CLS, you either drill a hole in the cell lid and use the Gauge Guard version for sealing and measuring the probe length, or you make use of the air agitation hole. For this installation you need the O-ring version.

Integrated LED
Integrated level probe
Gauge Guard or O-Ring
Various connector types

Technical parameters :

Input / Supply Voltage	12V (6 x 2V cells)
Max. Operating Volt. (12VDC nom.)	18VDC
Min. Operating Volt. (12VDC nom.)	10VDC
Current Consumption 12VDC	<20mA
Operational Temp. Range	30°C to +70°C
Temperature Sensor Range	n/a
Relative Humidity in Operation	95% no dew
Relative Altitude	Up to 2000m ASL
Protection class	IP65
Weight w. stand. version approx.	60g
Diameter probe (including seal)	5mm
Diameter hole for Gauge Guard	10mm (M10 drill)
Dim. Sensor head	30mm diameter, 20mm heights
Dim. Sensor bet. supply cable	27mm between cable grommets in housing. 31mm diameter of circular housing

Product Original Page

BATTERY PROCESS MONITORING, Battery protection systems,