BMS standard with CLS and temperature sensor and external LED
The ABERTAX® BMS is another quality product from Abertax Technologies.
It gives essential battery information i.e. full voltage, half voltage, temperature and electrolyte level.
It stores the number of charge/discharge cycles, temperature, electrolyte low level duration and deep discharge duration.
The BMS has 3 LED’s, which indicate the following:
- Flashing green: when powered and no warnings
- Flashing red: electrolyte level below specified minimum for flooded batteries and low voltage
- Flashing yellow: battery temperature above 50°C
The ABERTAX® BMS - STANDARD is our basic version for battery monitoring.
Three LEDs are integrated in a 45x45x21mm housing that can be placed on top of the battery cells.
The external level probe can be placed in the centre of the battery.
The temperature sensor can either be placed outside or inside the cell. A full and half voltage reading is available.
Actual and accumulated battery data is stored inside the BMS and can be uploaded via a USB interface to the PC.
- Integrated LED's
- External level probe
- External LED for electrolyte level
- Gauge Guard or O-Ring
- Temperature sensor inside or outside cell
- Various connector types
BATTERY PROCESS MONITORING, Battery fluid level control, Battery protection systems,
