Anasayfa Markalar Haberler Hakkımızda İK Sektörler Site haritası
İletişim     |     Dokümanlar     |     English  
Sepetiniz boş
DİZEL MOTOR KONTROLÜ VE JENERATÖR EKIPMANLARI >> FW MURPHY Kontrol Panelleri (Kompresör, Jeneratör& Motor) >> Motor Kontrol Cihazları (Elektronik)
FW MURPHY Kontrol Panelleri (Kompresör, Jeneratör& Motor)
Kontrol ve İkaz Cihazları (Gaz Sıkıştırma)
Motor Kontrol Cihazları (Elektronik)
- Engine Integrated Control System (EICS)
- EMS PRO Lite
- EMS-GC10
- A91
- AEC101
- ASM150
- ASM170
- Keystart 9620
PowerCore Dizel Motor Panelleri


  • Automatic engine controller with built-in Swichgage® instruments and hourmeter
  • Quick and easy to install
  • Advanced, rugged, reliable microprocessor-based design
  • Very competitive low cost
  • Operates on 12 or 24 volt systems
  • First-out shutdown LED


The AEC101 Automatic Engine Controller provides you with simple-yet sophisticated, engine automation. It features basic automatic start/stop capabilities plus other features found on more sophisticated and expensive controllers-all in an easy to install panel.

The AEC101 operates from 12 or 24 volt systems and includes crank and rest cycles, sensing circuits for crank disconnect and overspeed, overcrank, and re-crank on false starts. LEDs indicate engine operation, crank disconnection and the unit also has addition LEDs to indicate the cause of system shutdown.

The built in oil pressure and water temperature SWICHGAGE® instruments provide visual indication and can be set to initiate shutdown on critical pressure and temperature.

The electromechanical quartz based hourmeter can record up to 9,999.9 hours. It is housed in a shockproof case and built to be rugged and durable for a long life.

The Cascade controller allows manual or automatic selection of the operation sequence.

The AEC101 has additional features as listed below:

  • Adjustable Overspeed circuit
  • Adjustable Overcrank circuit
  • Adjustable Shutdown Lockout Delay
  • Engine Running Indication LED
  • Re-Cranks Engine on False Starts
  • Advanced Microprocessor Technology
  • Convenient Hat Bracket design for simple engine mounting
  • Built-in Hourmeter
  • Oil Pressure SWICHGAGE®
  • Temperature SWICHGAGE®


Operating Voltage: 9-35VDC continuous – operates during total blackout for 2 seconds minimum.


  • Operating Temperature: -40 to 85°C (-40° to 185°F)
  • Storage Temperature: -40 to 85°C (-40° to 185°F)
  • Humidity: 0-100%, non condensing

Inputs: Dedicated digital inputs for low oil pressure, high engine temperature, remote call to run, DC charge fail/Alternator fail. Two auxiliary inputs are configurable for multiple functions.


  • 7 Outputs
  • 4 configurable auxiliary sinking outputs (1A DC protected)
  • 3 dedicated outputs for Crank, Fuel, Alternator Excitation

Crank Attempts: 3, 5, 10, Continuous

Crank Rest: 5-60 seconds, Adjustable

Shutdown lockout time delay: 5, 10, 15, 20, 25, 30 sec.

Speed Sensing Input:

  • Magnetic Pickup (5-120VAC RMS / 0-10 kHz)
  • AC frequency (30-600 VAC RMS / 16-80 Hz)
  • Crank disconnect speed setting: Field settable 0-9999 RPM (16-60 Hz AC freq input)

Housing: Powdercoated 14 Gauge Cold Rolled Steel

Shipping Weights: 7 Lb. (3175 g.) approximately.

Shipping Dimensions: 12 x 12 x 5.5 in. (305 x 305 x 140 mm) approx.

Ürün Satışı / Teklif Talebi
Bu ürün için teklif iste
Teknik Dokümanlar