The EMS PRO is
a flexible all-in-one customizable unit that meets the needs of
engine-driven pumping equipment applications. The EMS PRO is a dedicated
microprocessor-based, single engine controller. It offers
field-adjustable operating parameters that can be changed without the
need for a computer. It is also able to support both mechanical and
J1939 electronic engines.
The EMS PRO has selectable auto start/stop features with several
throttling options. The auto start/stop options (Single Contact, Floats,
Momentary, Transducer and Clock) are available at the touch of a
button. In addition, there are many performance- enhancing features, all
of which are available through an operator interface that is easy to
learn and use. The EMS PRO is ideal for use with a remote modem or in a
SCADA system offering Modbus RTU protocol on either the RS232 or RS485
The EMS PRO has the ability to withstand a wide ambient temperature
range and comes standard in a NEMA 4 rated enclosure secured by four
rubber shock mounts. Inside is a backlit graphical display visible day
or night and under all kinds of conditions.
The EMS PRO has RS485, RS232 and J1939 CAN communication ports. The
standard unit uses the RS485 to drive external PVA gauges or Modbus RTU.
At the same time, the CAN port allows J1939 communication with the
engine ECU to display engine parameters and control the throttle via
TSC1 if supported by the engine.