typical load cell in shear beam design
is constructed to have a high accuracy of 0,04% (optionally 0,02%) of the Full
Scale. The Model F3271 series can be used to measure static compression or
tension forces. It is available for nominal loads in the range of 510 to 10197
for the weighing of loads
for force measurement useable
shear beam design
of 0,04% full scale, optional 0,02% full scale
starting from 510 kg
applied through a blind hole
class IP 68/ IP 69k
kg up to 0...10197 kg
Those force transducers are used in numerous
application with the need for high accuracy and a robust design. The high
accuracy allows to use the model F3271 series in weighing technology. The force
transducers can also be used to measure static compression or tension forces.
The bending beam is is mounted by using the two fastening bores on the cable
side.The force is applied at the opposite side, vertically to theaxis of load cell via a through-hole.
Because of the stainless steel construction and high protection class
IP68/IP69k, they suit for the use in tough environments. The special
calibration technique (mV/V/Ohm) allows to pass on corner balancing when using
several load cells.