Home Brands News About us HR Sectors Site Map Member Login
Contact     |     Documans     |     Türkçe  
Your basket is empty
DIESEL ENGINE CONTROL AND GENERATOR EQUIPMENTS >> FW MURPHY Gages (J1939/CAN, Electric, Mechanical) >> Gages (Electric)
FW MURPHY Gages (J1939/CAN, Electric, Mechanical)
Gages (J1939/CAN)
Gages (Electric)
- EG / EGS Series Gauges
- Fuel Level, Oil Pressure and Coolant Temperature Senders
Fuel Level, Oil Pressure and Coolant Temperature Senders


Pressure and Temperature Sender/Switch


·         ESPS pressure sender/switch

·         ESTS temperature sender/switch

·         Sender outputs compatible with Murphy EG(S)21 series gauge & Swichgage

·         Switch output operates at factory set low pressure or high temperature limits, for triggering operator warning or engine shutdown

EG21 electric pressure gauge and sender - click to enlarge

The ESPS and ESTS series are engine-mounted oil pressure and coolant temperature measurement sensors with both resistive sender and fault limit switch outputs.

The resistive sender outputs have the same pressure/temperature versus resistance characteristics as the Murphy ES series senders, allowing use with EG(S)21 series gauges or Swichgages, engine/genset controllers or input/output modules (e.g. the Murphy MeCAN interface).

Switch output contacts are normally open (at normal running pressures and temperatures), with the contacts closing to sensor body/case ground when pressure falls below, or temperature rises above, the factory set limits. The switch outputs can be used with external control devices to signal fault conditions, and trigger operator warning and/or engine shutdown protection. For example, the contacts can be used in place of, or in addition to, EG(S)21 Swichgage outputs, to provide two staged limits for warning and shutdown

Product Sale / Request Quotation
Request quotation for this product
Catalogue & Technical Specs
 ES(2)P/ ES(2)T Pressure And Temperature Senders
 ESF/ ES2F Fuel LEvel Senders