The PowerView Analog Gages (PVA) are a series of intelligent gages designed to display easy-to-read information transmitted by the PowerView. The PVA gages communicate with the PowerView via a single RS485 twisted pair MODBUS®† RTU serial link. The gages can be daisy-chained using quick-connect harnesses with watertight connectors.
The major feature of the PVA gages is their balance between design and functionality. These modern gages offer a selection of lens and bezel styles and colors. Pages 2, 3 and 4 of this document show you the complete selection of styles available.
The PVA gages also include features such as a smooth stepper motor operation for the 270° sweep pointer, an environmentally sealed case with two Deutsch DT style connectors molded into the casing, and green LED back lighting. They are available for standard 2-1/16 in. (52 mm) and 3-3/8 in. (86 mm) diameter hole sizes. In addition their plastic cases incorporate a “D” shape allowing panel cutouts that eliminate gage rotation during installation.
The PowerView Audible Alarm (PVAA) alerts operators to fault conditions via piezoelectric alarm and relay contacts. It also has a temporary silencer button that silences the audible tone for 2 minutes on warnings and 30 seconds on shutdown conditions.
All PowerView Gages can be powered by 12 or 24 VDC systems.
PVA20 Series Models:
PVA20 –A = Engine Oil Pressure
PVA20 –B = Coolant Temperature
PVA20 –C = Voltmeter
PVA20 –D = Percent Load at Current RPM
PVA20 –E = Transmission Oil Pressure
PVA20 –F = Transmission Oil Temperature
PVA20 –G = Engine Oil Temperature
PVA20 –H = Hydraulic Oil Temperature
PVA20 –J = Percent Fuel Level
PVA20 –K = Boost Pressure
PVA20 –L = Exhaust Gas Temperature
PVA20 –M = Intake Manifold Temperature
PVA20 –N = Auxiliary Temperature
PVA20 –P = Auxiliary Pressure
PVA20 –T = Tachometer
PVAA20 = Audible alarm
PVA35 Series Models:
PVA35 –T = Tachometer
PVA35 –S = Speedometer