Home Brands News About us HR Sectors Site Map
MACHINE AUTOMATION INDUSTRIAL
Contact     |     Documans     |     Türkçe  
Your basket is empty
DIESEL ENGINE CONTROL AND GENERATOR EQUIPMENTS >> FW MURPHY Process Monitoring Instruments >> Level Switches
MAIN
FW MURPHY Process Monitoring Instruments
Level Maintainers
Level Switches
- Scrubber Level System
- MLS Liquid Level Switch
- LS200 / LS200N / LS200NDVOR / L1100
- L129 Lube Level Switchgage
- L100 / L120 / L127 / L128 Float activated Oil Level Switch
- L150 / EL150K1 / EL150EX Level Switchgage
- L971 Low Level Switch
- DF755 / DF755EX / DF757
- BLSK1
- OPLH Series Level Switchgage
Pressure Sensors and Instruments
Speed/Time Sensors and Instruments
Temperature Sensors and Instruments
L150 / EL150K1 / EL150EX Level Switchgage



The L150 Series Level Swichgage instrument is a combination liquid level gauge and low-limit switch; each unit includes (1) a chamber with pivotal float, (2) an indicating dial with pointer and (3) a low-level contact. When properly installed and maintained, the float operates the pointer which, in turn, both indicates level during normal operation and closes a switching circuit if the level falls to the low-limit set point.


http://www.rekarma.com.tr/yonetim/urunresimb/720_1.jpg

Applications

The primary use of the L150/EL150K1 is for engine cooling systems, surge or expansion tanks, condenser radiator or vapor phase systems, pressurized or atmospheric systems. The Level Swichgage instrument can also be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activates alarms and/or shut down at a predetermined minimum level. These instruments are built for low pressure systems with a maximum of 25 psi (172 kPa) [1.72 bar].


  • Explosion-Proof Model Is Available.
  • Indicating Gauge
  • Low Limit Switch
  • Float Operated
  • Explosion-Proof Model Is Available.

  • SPECIFICATIONS

    L150

    ·         Maximum Temperature: 250° F (121° C)

    ·         Maximum Operating Pressure: 25 PSI (172 kPa)

    ·         Case: Die cast aluminum, polyurethane coated; approximate dimensions; 4-1/2 x 4-3/4 x 2-3/4 in. (114 x 121 x 70 mm)

    ·         Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center

    ·         Float: Brass

    ·         Lens: Polycarbonate

    ·         O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons

    ·         Gasket: Nitrile

    ·         Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting

    ·         Contact Rating: 2 A @ 30 VAC/DC. Wire: (1) 16 AWG x 26 in. (1.5 mm 2 x 660 mm) with terminals

    ·         Shipping Weight: 29 oz. (0.82 kg.)

    ·         Shipping Dimensions: 5-1/4 x 5-1/4 x 5-1/2 in. (133 x 133 x 140 mm)

     

    EL150K1

    ·         Maximum Temperature: 250° F (121° C)

    ·         Maximum Operating Pressure: 25 PSI (172 kPa)

    ·         Case: Die cast aluminum, polyurethane coated; approximate dimensions; 5 x 4-3/4 x 2-3/4 in. (127 x 121 x 70 mm)

    ·         Enclosure Rating: IP35

    ·         Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center

    ·         Float: Brass

    ·         Lens: Polycarbonate

    ·         O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons

    ·         Gasket: Nitrile

    ·         Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting

    ·         Snap-Switch: SPDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC

    ·         Wire: (3) 18 AWG x 14 in. (1 mm 2 x 356 mm)

    ·         Shipping Weight: 42 oz. (1.2 kg.).

    ·         Shipping Dimensions: 5-1/4 x 5-1/4 x 5-1/2 in. (133 x 133 x 140 mm)

     

    EL150EX

    ·         Maximum Temperature: 250° F (121° C)

    ·         Maximum Operating Pressure: 25 PSI (172 kPa)

    ·         Case: Sand cast aluminum, painted; approximate dimensions: 6-1/2 x 5-3/4 x 5-1/4 in. (165 x 146 x133 mm)

    ·         Mounting Holes: (2) 5/16 in. (8 mm) diameter at 5-1/2 in. (140 mm) on center

    ·         Float: 304 Stainless steel

    ·         Lens: Tempered glass

    ·         O-rings: Saturated Nitrile, suitable for coolant or hydrocarbons

    ·         Gasket: Nitrile

    ·         Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting and 1/2 NPT to 1/4 NPT reducer fitting

    ·         Snap-Switch: SPDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC

    ·         Wire: Wired to terminal block

    ·         Laboratory Approvals: CSA Listed for Hazardous Locations Class I, Division 1, Groups C & D

    ·         Shipping Weight: 5 lbs. (2.26 kg.)

    ·         Shipping Dimensions: 6-1/2 x 6-3/4 x 6-3/8 in. (165 x 171 x 162 mm)





    Product Sale / Request Quotation
    Request quotation for this product
    Catalogues and Technical Specs
     L150 / EL150K1 / EL150EX




    webatolyesi